|
|
Tricorne Boulder
1. **V0 Fun arete that would might be
easier if it was cleaned.
2. **V2 Start with right hand on a sidepull rail and left hand on a decent crimp then head up the surprisingly tricky slab.
3. **V3 Work the slopey crimps up to the high point. Harder than it looks.
4. **V3 SDS on the horizontal flake and press up to a good ear then top out.
5. *V1 Traverse the arete. It's dirty, but the crux is getting on the arete.
6. *V2 A strong rail/arete.
7. **V2 A strange rail/arete.
7a. **V? SDS on a sharp slopey crimp looks possilbe.
8. V? Cool undercling start to slopey micro knobs.
2. **V2 Start with right hand on a sidepull rail and left hand on a decent crimp then head up the surprisingly tricky slab.
3. **V3 Work the slopey crimps up to the high point. Harder than it looks.
4. **V3 SDS on the horizontal flake and press up to a good ear then top out.
5. *V1 Traverse the arete. It's dirty, but the crux is getting on the arete.
6. *V2 A strong rail/arete.
7. **V2 A strange rail/arete.
7a. **V? SDS on a sharp slopey crimp looks possilbe.
8. V? Cool undercling start to slopey micro knobs.